Xhorse VVDI2 key programmer Full Version comes with Basic Function + VW + AUDI Generation 5+BMW OBD Fucntion+BMW CAS4+ Porsche+ PSA functions +Tango + J2534. Now it has VV-05 VAG MQB immobilizer function,and VT-01 Toyota H Chip for free.This pacakge contain VVDI2 FULL + Totota 8A adapter.
Original Xhorse VVDI2 Commander Key Programmer for VW/Audi/BMW/Porsche/PSA Full Version+Toyota 8A Non-smart Key Adapter
UK/EU Warehouse Fast Shipping NO TAX
This pacakge contain VVDI2 FULL + Totota 8A adapter
Top 5 Reasons to Get VVDI2:
Xhorse VVDI2 Full Version V6.8.2 software download link
Support VW, Audi, BMW,PSA
This VVDI2 Full Package
with 13 all Softwares.
Contains the AUDI 5th, BMW CAS4+ Functions Already
VVDI2 Full Package Covers All the Functions of VVDI, VVDI 5th IMMO Adapter,
BMW Multi Tool, CAS Plus for BMW Multi Tool, CAS4 Plus for BMW Multi Tool
Update Online Free Lifetime
active the "pin, cs, mac authorization".
After receive the VVDI2, pls just give us serial number to active.
VVDI2 Is Multi-language,VVDI2 Commander Key Programmer language:
VVDI2 for BMW language:
VVDI2 for VAG language:
VVDI2 for Porsche language:
VVDI2 for PSA language:
VVDI2 for Transponder programmer language:
VVDI2 Using Notice :
1.VVDI 96bit ID48 cloning
costs 100 points each time. You can pay 15USD
for 1 token.
2.Now it's free to activate the VAG EDC17 PIN, MAC, CS calculation via eeprom and flash dump
(when you receive the package, give us your SN number, then will activate it for you.)
3.How to open the Toyota H Chip Activation :
1) Use your Phone to download Xhorse APP
and verify with your phone number
2) Select in xhorse "Update Kit" software
and bind your machine
3) Log in the Xhorse APP,choose the "SHOP"
to enter the "Bonus Points Mall"
then click "Activate Toyota H"
Function list for newest Xhorse VVDI2 :
||VAG 4th immobilizer
||VAG 5th immobilizer
||Porsche immo data
||Copy 48 Transponder (96 bit)
||VAG MQB immobilizer
||Toyota H Chip
Support Volkswagen, Audi, Skoda, Seat, Porsche, Bentley ect.
Main Function:Diagnose,4th immo,5th immo system
Program Engine control unit(Passat ICC By OBD)
Unlock Immo1/Immo2 firmware protection
Support data manipulation tools
K-line instrument /immo box
adapt unit module component protection, dump tool and so on
Support file make key and key learn by OBD2
Transponder Programmer Introduction:
Remote transponder programmer, hundred kinds of special transponders, thousand kinds of vehicles supported immo data tool,
prepare remote, copy remote, copy transponder(11,12,13,40,44,Hitags(46),48),other key tool(find 7th CS from working key) etc
OBD key learn(CAS1/CAS2/CAS3/CAS3+)
File Make Key(CAS1/CAS2/CAS3/CAS3+/CAS4/CAS4+)
read & write EWS/CAS EEPROM
synchronize DME-CAS, synchronize CAS-ELV
CAS repaired etc
Fix CAS4 EEPROM key programmer
Generate specialized chips
Immobilizer data processing tool
Other key tools
Generate remote control
Others vvdi2 functions list:
Peugeot/Citroen/DS get password, key learn
test remote frequency
Support PASSTHRU J2534,can be used by third party software ODIS ect.With built-in switch matrix, it supports third-party diagnostic software including:
ODIS, Toyota TIS techstream etc.
To perform VVDI2 diagnostic function, third-party diagnostic software should be compatible with J2534 function.
VVDI2 BMW FEM/BDC Function Authorization
VVDI2 - BMW FEM/BDC system(function released and available, just no user manual)
Users can refer to following information (3 steps for make keys:get key info->programming FEM/BDC system->make keys)
1.support make new key with ignition switch(support add spare key and all key lost, all key lost require ISN)
2.support reset FEM/BDC KM(cluster require reset manually)
3.support erase key(after erase the key position become blank position)
4.support backup coding
5.support restore coding
1.backup coding and restore coding can direct operation generally.
2.add keys, reset KM, erase key must programming FEM/BDC system first
3.in FEM/BDC interface, if 'get key info' the type not support, it will show:customer should use "BMW E-sys software" program FEM/BDC system.
then programming FEM/BDC system with VVDI2-BMW
4.when operation on 'programming FEM/BDC system'interface,please don't close this software window until all procedures completed.
5.programming FEM/BDC system, require soldering and get eeprom.（FEM 95128 chip, BDC 95256 chip）usually there are 2 same chips on the module,
please refer to the software diagram, select the correct one.
6.programming FEM/BDC system,must restore the original eeprom, restore coding.if cannot restore coding or after restore coding assemble FEM/BDC module back to car,
but with problem(such as the remote control cannot start the car
or the car with window problem)please use "BMW E-sys software" coding for FEM/BDC system
7.if connect power to FEM/BDC module, but the relay keep ringing,please contact technical support for help.usually operation on FEM/BDC should be ok,just need to programming.
VVDI2 VAG copy48 Function Authorization
VVDI2 VAG ID48 model add key & all key lost supported:
2015 Skoda Octavia
2015 VW Passat smart key
2015 VW Scirocco smart key
2015 Audi Q3
2014, 2015, 2016 Tiguan smart key
parts of 24C64, 24C32 all keys lost without removing dash
VVDI2 Copy 48 Transponder (96 bit) Function Authorization Service Get free VAG MQB Function
VVDI2 Copy 48 Transponder (96 bit) Function(VV-04 Authorization):
Can copy ID48 chip data without OBD connection to the car incl. VW 2015-2017
Cannot program a new key when all keys are lost
VVDI2 Special Function:
Including all VVDI functions, improved and more stable
More vehicle coverage, multi Immo functions
New added plug-in function and reserved connectors to include all VVDI functions
VVDI PROG includes all the VVDI functions, The function of Tango, Remote control generation and chip identification is improved, And also the coil’s stability has been enhanced.
More ever, Users do no need to connect VVDI PROG with computer or other devices to identify chip or detect remote frequently.
Add more vehicle models
VVDI supports diagnostic function only for VAG groups, But VVDI PROG has achieved multi brand vehicle diagnosis and supports part of vehicle immo programming function
and software online upgrade.
VVDI PROG can replace lots of customized devices. Users do not need to purchase specific OBD tool for specific vehicle makes which will save you a lot.
Plug-in function, reserved connectors
VVDI 2 can act as a multifunction programmer to connect plug-ins, and read & write IC and CPU data.
Can connect BMW plug to realize OBD function, And meanwhile reserve some connectors for further uses.
The core function is to detect the remote control frequency:
Automatically identify chip type
Support multi-function on VW vehicles
Read BMW ISN
Remote control programmer
J2534 Compatible Adapter
1.Detect key frequency, automatically identify chip type
The test result can show on the main unit display, no need to connect computer
VVDI technician has devoted themselves to VVDI free update online and update service in the pass five years. This is what VVDI has been widely respected and ranked as a power tool.
There is no doubt that the more power and high-end configuration VVD2 will inherit the fine traditions.
Apart from free update online service and system optimization, more powerful functions and vehicle models (Like Porsche) will soon be available via update. And other more functions, you name it.
VVDI2 goes beyond than VVDI in function, connectors and vehicle coverage etc. After all, VVDI belongs to locksmith tool while VVDI2 becomes a comprehensive locksmith device.
VVDI2 key programmer Parameter
Xhorse VVDI2 full version authorization option picture:
0=(VK-01) key programmer
1=(VJ-01) Passthru J2534
2=(VV-01) VW 4th
3=(VV-02) VW 5th
4=(VB-01) BMW OBD Function
5=(VB-02) BMW CAS4 Function
CAS Plug need to buy separately
: CAS Plug for VVDI2 BMW or Full Version (Add Making Key For BMW EWS)
1.VVDI 2 Main Interface
2.5th BDM Programmer
4.Remote Programmer (no need to buy SK184, included)
Scan Xhorse QR code to order by mobile phoneContact information:Live Support: Chat with us onlineEmail: Sales@XhorseTool.co.ukSkype: XhorseTool.co.ukWhatsapp:
+86-13618614163If you have any problems, please do not hesitate to contact us. If your shipping method is fast shipping, please kindly give us your phone number for shipping.